Power Saving Lighting Technology

led productsLEDs (Light Emitting Diodes) are small solid light bulbs which are extremely energy-efficient. Until recently, LEDs were limited to single-bulb use in applications such as instrument panels, pen lights, electronics and, more recently, strings of indoor and outdoor architectural lights. It also effecting the cooling of the structure if you are using Air Conditioning.


  • Long-lasting - LED bulbs last up to 10x as long as compact fluorescents, and far longer than typical incandescents.
  • Durable - since LEDs do not have a filament, they are not easily damaged under circumstances when a regular incandescent bulb would be broken. Because they are solid, LED bulbs hold up well to jarring and bumping.
  • Cool - These bulbs do not cause heat build-up; LEDs produce 3.4 btu's/hour, compared to 85 for incandescent bulbs. Together with Daiken Air Conditioning installed this will also cuts down on the costs in the home for air conditioning.
  • Mercury-free - no mercury is used in the manufacturing of LEDs.
  • Highly efficient - LED light bulbs use only 2-10 watts of electricity (1/3rd to 1/30th of Incandescent or CFL) Small LED flashlight bulbs will extend battery life 10 to 15 times longer than with incandescent bulbs. Also, because these bulbs last for years, energy is saved in maintenance and replacement costs. For example, many cities in the US are replacing their incandescent traffic lights with LED arrays because the electricity costs can be reduced by 80% or more.
  • Cost-effective - although LEDs are slightly relatively expensive, the cost is recouped over time and in battery savings. For the AC bulbs and large cluster arrays, the best value comes from commercial use where maintenance and replacement costs are expensive.
  • Light for remote areas - because of the low power requirement for LEDs, using solar panels becomes more practical and less expensive than running an electric line or using a generator for lighting. Great for bathroom lighting.
  • Another great reason to switch to led bulbs is the low amount of energy is consumes. Being low power consumer it can be powered easily using solar panels. Solar electricity Brisbane is another way to light up your home and garden using led light bulbs.






Our energy-efficient LED lighting are still high, in most cases the switch to led lighting in the industrial area already pays for itself,when requirements are properly implemented and all factors are considered, suchas energy costs, service life, and maintenance costs. An amortisation time of between 1 1/2 and 6 years could be achieved inprojects completed to date. It is the best choice for your new house. Visit Moranbah Qld New home Builders for building assist.

A facilities building conference room was completely relit with led lights, providing improved light quality and energy savings of approximately 80 percent, compared with the fluorescent troffers that were replaced.
Is this new advanced design led applicable to the growing of algae in any way? is it usable in other areas, such as a continuous oil extraction tool for algae? could these leds be used together with other special lighting forms that would increase the rate of growth of algae, etc? it would be interesting to learn more about the beam angles that in turn increase, and use all of the lummens produced. I personally know little about the technology, but these new lighting designs and their unique attributes will create many changes and many uses in the future. For window and footpath projects, hire a concrete cutting Brisbane service for your convenience.